
Fabric: The RTW top is made from tissue-weight jersey (the black in the middle), whereas both mine are made from lightweight jersey – white and cobalt gray – from http://www.gorgeousfabrics.com/

Fabric: The RTW top is made from tissue-weight jersey (the black in the middle), whereas both mine are made from lightweight jersey – white and cobalt gray – from http://www.gorgeousfabrics.com/
Inspiration:
tight but skim the body instead. Then I added the drape and cut my 1st muslin. This muslin proved a need for a cowlneck adjustment and I cut the 2nd muslin. I used the 2nd muslin to establish the bottom hem and the precise lines of the right armhole. The 3rd and final muslin (on the photo) had all things figured out plus the bias established, but something was still missing… It was just like my inspiration
but I did not like it because it was too geometrical and did not gel with my personality, if that makes sense. It was then when I remembered a cool detail that the Slapdash Sewist had added to a dress of hers (see here: http://theslapdashsewist.blogspot.com/2008/07/goddess-dress.html), i.e. a twisted shoulder detail. So, I added some length to the right shoulder seam and twisted. I liked it and went with it.

Actual garment:
pped around the waist the top has more of a dressed up-eveningwear look.

The slideshow below illustrates how I drafted/draped the tee. For the bodice I used a tee block that I made a few years ago and the sleeve was draped on a dressform.
Sleeve: SAs presses towards the bodice to control the “puff,” hem – unfinished, sleeves rolled up

Making the unwearable muslin:
At this point I made an “overall shape” mock-up by cutting and pinning (time after time) one of DH’s oversized white t-shirts. Eventually I arrived at the muslin pieces as shown in the slideshow. Next, I added a wedge to the upper front for the cowl-neck effect. Lastly, I freehanded the stitch lines to mimic as close as possible the original design. Then I transferred the muslin to paper and trued the topstitching lines so the back and front matched.
From there, I cut out the separate pattern pieces.
This slideshow illustrates the process:
Construction:
Seams are first serged, then pressed tone side, then topstitched with a coverstitch machine (the parallel lines remain on the wrong side).
The lines that are only topstitched I first interfaced with 3/8” bias fine-knit fusible.
The neckline is faced and understitched.
Hem is folded under and topstitched.
These are photos of the WS and RS of the stitching


To do for the contest entry: I do have some tweaking to do, reposition some lines and rethink construction, but really, the style is so loose that I do not foresee any major changes. With other words, the fit was the easier part with this top. Now, I am impatiently waiting for my samples and then fabric to arrive!



It took two muslins to get the pattern ready but the patternmaking process was fun.
I have already thread traced the shell and the lining. I have never actually thread traced a garment before, at least not in its entirety. This time I chose to do so just to see how it goes. My conclusions: 1. it is time consuming and 2. it is worth it, especially for the rayon lining.