Copying RTW

After my last post there were requests to show how I copy RTW when I have the item.

First, these are the materials I use: GLAD Press n' Seal, scissors, tracing wheel, ruler, curve, pattern weights, pencil, sharp tip marker or any other marker.

Other helpful materials: pretty much anything that is generally useful for drafting, e.g. hipcurve, metal curve, etc.

I start by laying the item flat and placing GLAD on top with the stickier side towards the garment. Then, I use a marker to mark the seamlines, garment outlines, etc.:

Next, I lift the GLAD sheet and place it on tha pattern paper with the sticky side down , and with a tracing wheel go over all the marks:

Then, I completely remove the GLAD sheet and as you can see the marks are indented in the paper:

Last, I go with a marker.pencil over the tracing wheel indentations:

Of course, it is a whole lot more complicated when you have darts in the pattern, gathering, sleeves, etc. Even if there are no such complications, you still should not rely solely on what you've traced. You have to measure to ascertain the side seams on the back and front are the same, that curves are appropriate, that everything is symetrical. Of course, you need to make a muslin as well. Thread has had some good articles on the topic. In future when I copy something with a more difficult element, I'll try to document the process for those interested.

BTW, the tracing you see above is a tracing a did for one of the items from my SS'09 sewing plan: the Loose Woven Tank. Initially, I was planning on using This Burda 7661 View B. When I thought about it, though, it became clear that the only instance I needed a pattern for was for the armhole. Therefore, I decided to skip buying a pattern and instead traced off the armhole of a tank I have. I had to lower it and tweak it but that could have very well been the case with the Burda pattern anyway. It took me two muslins but I ended up with something I was truly happy with. This is a collage of the pictures of the muslin I took. Excuse the poor quality but it was close to midnight and the lighting in my sewing room was not optimal.

Burda WOF 09-2007-121 Jumper: Review Based on my Muslin

I still don’t know if I am going to make this jumper, it would depend largely on whether I find the right fabrics (read towards the end).

Regardless, I made and fitted my muslin:

and this is the magazine photo:

Here are my findings (FYI, I am size 34 at the hips, 36 at the waist and 38 at the bust and 5”4” and I cut the pattern appropriately):

Fitwise:
- spot on at the bust
- too big in the waist: I took in close to 3.5” from the circumference at the top of the band and about 3” at the bottom of the band. This I find to be typical of Burda WOF – too much wearing ease at the waist.
- very slightly larger in the hips: took in about an 1” from the circumference
- the bodice piece was spot on lengthwise
- the skirt piece was 1.5” too long (as expected)

Design:
I read all the reviews on PR (and there are many reviews for this jumper) and noone seems to have been displeases with the pleat in the back skirt, therefore, my observation may be the “just me” kind. Anyway, when I pleated the back skirt as the pattern indicated, I ended up with too poofs right at my derriere, and they were not the right kind of poofs either. I tried several different alternative ways of pleating, including completely removing the pleat (which might work if your rear part is fairly flat) and the best I managed to end up with was two pleats: the first is 1.5” deep and positioned 1” from the CB. The 2nd is placed 2” away from the first and is 1.25” deep. Both are pleated towards the CB.

Construction:
The instructions suggest cutting the front bodice on fold, with the fold being the straight grain. Well, I just don’t see how this is going to make that edge stable and it is a neckline edge. I think you would need to cut 4 front pieces, sew at the neckline and understitch. Also, If I do the jumper, I’ll cut the front and back bodice lining pieces 1/8” smaller all the way around, so that armsye and neckline seam won’t be visible (hope this makes sense).

Fabric:
Well, this one I think is tricky if you are doing a fall-appropriate garment. Weight of the fabric: I think, if 1 is tissue-weight and 10 mid-weight, one should aim for fabric with weight coefficient of 7-8. Otherwise, IMO, there would be a lot of bulk at the seams that connect the bodice to the band and the band to the skirt. Secondly, since at least I wear tights in fall, the skirt part of the dress MUST be either lined with some stretch lining that does not cling or worn with a slip under, one made also from some stretch lining that does not cling. Of course, if you are making a summer jumper (to be worn with a cami), this would be a nonissue.

2nd Muslin - Getting Closer to Siling Off!

I finally made the 2nd muslin for the sailor pants… Yeah, it took a while, didn’t it! It’s made from cotton twill (in order to get a more exact idea of how the pant would drape). The front crotch problem seems to be resolved and I like the placement of the pockets/buttons/buttonholes. Here are some photos of the front and the back:

After the 2nd muslin I had a 9-point list of pattern adjustments that I needed to apply to my pattern - some minor fitting issues and some other issues related to the construction of the sailor front.
Here are my materials for the pant:

Now back to making the actual pant!

Sailor Pants Drafting and Fitting - Part I

My parents arrived from overseas for a visit and since I have not seen them in a year, I am spending most of my free time with them (read: very little sewing). They will stay here a month but when you see your family so rarely, every day is precious. A funny thing, my DH took this picture of us at the airport and sent it from his phone to my email. He mistyped, though, and the title of his email read "Airport pigs" as opposed to "Airport pics!" I thought it was hilarious!

Anyway, I managed to draft a pant sloper, made a muslin and fitted it (somewhat).

This is a photo of the draft (front and back drafted on the same piece of paper) and of my drafting tools. As you can see, I am very low-tech!

I learned how to draft a trouser in 2005 in Chicago. The place I went to has a website (http://www.ewsacademy.org/) if you want to check it out. The website used to sell drafting tutorials but I am not sure if they still do. The guy who owns the school has a place in the South side of Chicago where he teaches groups of 6-7 people. He teaches everything as far as drafting and tailoring is concerned but I got pregnant and managed to finish only the trouser and the skirt drafts. I have drafted a few pairs of pants since (for both men and women), using the method I learned there, and it has been successful. I would love to learn how to draft a more fitted (jean-type fit) pants, though.

This is a picture of the front where there is a crotch problem that I have to figure out. The back I was quite happy with, did not take a picture of it though. I tried leting out the crotch seam next to where the folds appear and it helped but did not solve the issue. I am not sure quite how to proceed because it feels like i have enough width in the front (for a fitted pant, anyway). I have noticed though that this problem gets almost self-resolved by making the pant in something more substantial (weight-wise) than muslin. What do you think?

As far as the "sailor front, " so far these are my working pattern pieces, which were drafted after slashing the front where I would like the sailor detail to appear. The slash also takes care of shortening the front rise to where I would like it be (in th muslin it is too high for me, at least in the front).

The purpose of the first muslin I made was to get the fit right in the hips and thighs. I obviusly still have to work on the front crotch. I find that For me, K. King’s “The Trouser Draft” is a good reference for fitting trousers: http://www.kennethdking.com/httpwww.kennethdking.combook3.html#trouser

K. King is an extremely detailed, non-scholarly, visual, step-by-step writer, which appeals to me. He also explains the logic behind what he does which is also something I like. The book teaches you how to draft a trouser and that part I have not tested yet, however, I find the chapter on fitting the trouser extremely helpful. I used the fish-eye alteration to eliminate fabric from the back of my thigh under the buttocks. This method essentially asks you to pin out the excess fabric and then transfer this excess between the inseam and outseam.

I will be making a second muslin to incorporate the sailor front detail. This second time around, I will use some cheap mid-weight denim, instead of muslin, to get a better idea of the drape of the pant.

Meanwhile, since trouser fitting and sewing is a quite involved process and I want to spend time with my parents while they are here, I might make an easy top to feed my sewing habit :)